Convert inches to meters (2024)

Home / Length Conversion / Convert inches to meters

Please provide values below to convert inch [in] to meter [m], or vice versa.

Inch

Definition: An inch (symbol: in) is a unit of length in the imperial and US customary systems of measurement. An inch was defined to be equivalent to exactly 25.4 millimeters in 1959. There are 12 inches in a foot and 36 inches in a yard.

History/origin: The term "inch" was derived from the Latin unit "uncia" which equated to "one-twelfth" of a Roman foot.

There have been a number of different standards for the inch in the past, with the current definition being based on the international yard. One of the earliest definitions of the inch was based on barleycorns, where an inch was equal to the length of three grains of dry, round barley placed end-to-end. Another version of the inch is also believed to have been derived from the width of a human thumb, where the length was obtained from averaging the width of three thumbs: a small, a medium, and a large one.

Current use: The inch is mostly used in the United States, Canada, and the United Kingdom. It is also sometimes used in Japan (as well as other countries) in relation to electronic parts, like the size of display screens.

Meter

Definition: A meter, or metre (symbol: m), is the base unit of length and distance in the International System of Units (SI). The meter is defined as the distance traveled by light in 1/299 792 458 of a second. This definition was slightly modified in 2019 to reflect changes in the definition of the second.

History/origin: Originally, in 1793, the meter was defined as one ten-millionth of the distance from the equator to the North Pole. This changed in 1889, when the International prototype metre was established as the length of a prototype meter bar (made of an alloy of 90% platinum and 10% iridium) measured at the melting point of ice. In 1960, the meter was again redefined, this time in terms of a certain number of wavelengths of a certain emission line of krypton-86. The current definition of the meter is effectively the same as the definition that was adopted in 1983, with slight modifications due to the change in definition of the second.

Current use: Being the SI unit of length, the meter is used worldwide in many applications such as measuring distance, height, length, width, etc. The United States is one notable exception in that it largely uses US customary units such as yards, inches, feet, and miles instead of meters in everyday use.

Inch to Meter Conversion Table

Inch [in]	Meter [m]
0.01 in	0.000254 m
0.1 in	0.00254 m
1 in	0.0254 m
2 in	0.0508 m
3 in	0.0762 m
5 in	0.127 m
10 in	0.254 m
20 in	0.508 m
50 in	1.27 m
100 in	2.54 m
1000 in	25.4 m

How to Convert Inch to Meter

1 in = 0.0254 m
1 m = 39.3700787402 in

Example: convert 15 in to m:
15 in = 15 × 0.0254 m = 0.381 m

Popular Length Unit Conversions

cm to inches

inches to cm

mm to inches

inches to mm

meters to feet

feet to meters

km to miles

miles to km

cm to feet

feet to cm

inches to feet

feet to inches

meters to yards

yards to meters

mm to cm

cm to mm

cm to m

m to cm

cm to km

km to cm

mm to feet

feet to mm

meters to miles

miles to meters

feet to miles

miles to feet

yards to feet

Convert Inch to Other Length Units

Inch to Kilometer

Inch to Decimeter

inches to cm

inches to mm

Inch to Micrometer

Inch to Nanometer

Inch to Mile

inches to yards

inches to feet

Inch to Light Year

Inch to Break

Inch to Exameter

Inch to Petameter

Inch to Terameter

Inch to Gigameter

Inch to Megameter

Inch to Hectometer

Inch to Dekameter

Inch to Micron

Inch to Picometer

Inch to Femtometer

Inch to Attometer

Inch to Megaparsec

FAQs

How do you convert inches to meters? ›

To convert inches to meters, you should multiply your length value by 0.0254: m = in × 0.0254 . To convert meters to inches, you should multiply your length value by 39.3701: in = m × 39.3701 .

Find Out More ›

How many inches does 1 meter have? ›

One meter is approximately equal to 39.3700787402 inches.

Show Me More ›

Is 40 inches equal to 1 meter? ›

Therefore, 40 inches is 1.016 metres.

What is 3 meters in inches? ›

3 meters is approximately 118.11 inches. The conversion fact relating meters and inches is as follows: 1 meter ≈ 39.37 inches.

Find Out More ›

How do you convert meters to inches? ›

1 metre is equal to 3.28 feet, while 1 foot is equal to 12 inches. From the statement above, it is clear that 1 metre is equal to 12*3.28 inches. On multiplying, it turns out that 1 metre is equal to 39.36 inches.

Get More Info Here ›

Which is bigger, 2 meters or 40 inches? ›

Expert-Verified Answer

Therefore, 2 meters is bigger than 40 inches.

Read The Full Story ›

Is 1 meter 3 feet? ›

Meter to Feet Conversion

One meter is approximately equal to 3.28084 feet.

Is 36 inches 1 meter? ›

Metre (not meter, please note) is the base unit of length in The International System of Units (SI). The corresponding unit in the Imperial System of Units is the foot. (plural feet). One meter is 39.37 inches.

Learn More ›

Which is bigger 1 meter or 1 inch? ›

1 meter = 39.3700787 inches, and 1 inch = 0.0254 meters. Using these relations, you can easily convert a meter into inches and vice-versa. One thing is quite apparent from the above relation; a metre is greater than an inch.

Learn More Now ›

Is 1 foot is the same as 1 meter? ›

In both customary and imperial units, one foot comprises 12 inches, and one yard comprises three feet. Since an international agreement in 1959, the foot is defined as equal to exactly 0.3048 meters.

Learn More ›

Is 3 ft longer than a meter? ›

A meter is the standard metric unit of measurement and is equal to 3.2 feet. A yard is equal to 3 feet.

Learn More Now ›

Does 3 meters equal 10 feet? ›

To convert meters to feet, you can use the conversion factor that 1 meter is approximately equal to 3.28084 feet. Therefore, 3 meters is approximately equal to 9.84 feet.

Read On ›

What is the function rule for converting inches to meters? ›

For converting inches to meters, divide by 39. 3700787 or multiply the inch value by 0.0254. Hence, 1 meter is equivalent to 39.3701 inches. For Example, to find out how many meters are there in 36 inches, multiply 36 by 0.0254 to obtain the value of 0.9144.

Get More Info ›

How do you convert area in inches to area in meters? ›

1 Sq. Inch = 0.000645 Sq. M.

See Details ›

How do you convert lines per inch to meters? ›

For the conversion of 1 inch to a meter, divide the length value by 39.37. There are 2.54 centimeters in an inch. Therefore, there are 0.0254 meters in an inch. 15000 lines /inch = 15000 * 0.0254 lines / meter.

Explore More ›

How do you convert inches to centimeters and meters? ›

To convert meters to cm, multiply the meter value by 100. For example, to calculate how many centimeters is 2 meters, multiply 2 by 100, that makes 200 cm is 2 m. The value of 1 inch is approximately equal to 2.54 centimeters. To convert inches to the centimeter values, multiply the given inch value by 2.54 cm.